BASi
Bioanalytical System Inc.
BASi is a drug development firm providing contract research services and unique products for the pharmaceutical, biotechnology and medical device industries.
BASi PWR-3 Power Module
The compliance voltage and maximum current of BASi PC-controlled potentiostats are 12 V and 100-200 mA. These are more than sufficient for most voltammetry experiments, but may not be adequate for controlled potential electrolysis experiments. The PWR-3 Power Module supplies up to 1 A with a compliance voltage of 85 V, and can be used either as a current and compliance voltage booster for other BASi potentiostats or as stand-alone potentiostat for constant potential experiments (i.e., it has no potential scanning capabilities). Another advantage of the PWR-3 is the unique design of the current-to-voltage converter, which eliminates the potential loss at the working electrode caused by high current through the lead wire.
Features
- Power potentiostat - 1 Ampere and 85 Volts compliance
- Can be used alone or as a booster for other BASi potentiostats
- Remote control from Epsilon
- Unique current-to-voltage converter design prevents loss of potential at the connector at high currents
- Economical - high performance at a low cost
- External applied potential input
- Excellent frequency response to 20 kHz
Specifications
| Potentiostat | Applied Potential Range: ±9.99V Resolution: ±10mV Accuracy: ±5mV Compliance Voltage: ±85V Maximum Current: > ±1A Rise Time (10-90%) x 1 Gain (No Load): < 10µS Slew Rate: 2V/µS Offset Voltage Stability: < 5mV/°C; < 20mV/week Noise and Ripple: 5mV RMS External Input through rear panel jack or remote cell lead |
| Current-to-Voltage Converter | Range: 10-1000 mA/V, 1:2:5 sequence in 7 steps Accuracy: < 1.5% Maximum Current: > ±1A Output Filter: 15µs, 10 ms, 5 s, RC time constants Frequency Response, Small Signal: -3dB @ 20KHz on 1A Range, 10 ohm Source Impedance |
| Power | 120V/240V-50/60Hz |
| Weight | 25 lbs. (11.4 kg) |